Product Details
This Whiteline 27mm Rear Sway Bar Mount Kit fits the 2006 Saab 9-2X 2.5i (GD/GG). Whiteline part number: KBR21-27. Included: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. Placement: rear.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. To go with it on the 9-2X, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Hardware: Hardware supplied: mounting hardware.
- Finish: A powder coated finish resists corrosion and wear.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Install guide: An install guide comes in the box.
Specifications
| Part Number | KBR21-27 |
| Part Name | Sway Bar Mount |
| Vehicle | 2006 Saab 9-2X 2.5i |
| Chassis Code | GD/GG |
| Bar Diameter | 27 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 27 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



