Product Details
This Whiteline 27mm Rear Sway Bar Mount Kit fits the 2000 Subaru Legacy GT Limited (BE/BH). Position: rear. Included: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. Whiteline part number: KBR21-27.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts for the Legacy.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Instructions for fitting are packed in the box.
- Hardware: Supplied with mounting hardware.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | KBR21-27 |
| Part Name | Sway Bar Mount |
| Vehicle | 2000 Subaru Legacy GT Limited |
| Chassis Code | BE/BH |
| Bar Diameter | 27 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 27 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



