Product Details
This Whiteline 27mm Rear Sway Bar Mount Kit fits the 1995-2000 Subaru Legacy Brighton, L (BD/BG/BE/BH). You receive 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. Position: rear. Whiteline part number: KBR21-27.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Install guide: An install guide comes in the box.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Hardware: Supplied with mounting hardware.
Specifications
| Part Number | KBR21-27 |
| Part Name | Sway Bar Mount |
| Vehicle | 1995-2000 Subaru Legacy Brighton, L |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bar Diameter | 27 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 27 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



