Product Details
This Whiteline 27mm Rear Sway Bar Mount Kit fits the 1995-1999 Subaru Legacy Outback (BD/BG/BE/BH). Position: rear. Included: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. The part number is KBR21-27.
A bar that moves in its mounts is a bar that is not working. Replacing soft or worn mount bushings keeps it centered and lets it start resisting body roll from the first degree of lean. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. To go with it on the Legacy Outback, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Hardware: Hardware supplied: mounting hardware.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Install guide: Whiteline packs an install guide with it.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Finish: Powder coating covers the metal for protection against chips and rust.
Specifications
| Part Number | KBR21-27 |
| Part Name | Sway Bar Mount |
| Vehicle | 1995-1999 Subaru Legacy Outback |
| Drivetrain | AWD |
| Chassis Code | BD/BG/BE/BH |
| Bar Diameter | 27 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 27 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



