Product Details
This Whiteline 24mm Rear Sway Bar Mount Kit fits the 2005 Saab 9-2X Linear (GD/GG). Included: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. Part number KBR21-24. This part is for the rear of the vehicle.
Sway bar mount bushings work as the bearings of the roll-control system. They need to hold the bar firmly without binding, and they have to cope with constant twisting. A new set restores that balance and quiets the knocks that worn ones make. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1 hour. No alignment is needed afterward. To go with it on the 9-2X, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Install guide: Step-by-step installation instructions come with it.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Finish: The metal is powder coated, which resists corrosion and wear.
Specifications
| Part Number | KBR21-24 |
| Part Name | Sway Bar Mount |
| Vehicle | 2005 Saab 9-2X Linear |
| Chassis Code | GD/GG |
| Bar Diameter | 24 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 24 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |




