Product Details
This Whiteline 24mm Rear Sway Bar Mount Kit fits the 1998 Subaru Legacy GT Limited (BD/BG/BE/BH). This part is for the rear of the vehicle. In the box: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. Part number KBR21-24.
Sway bar mount bushings work as the bearings of the roll-control system. They need to hold the bar firmly without binding, and they have to cope with constant twisting. A new set restores that balance and quiets the knocks that worn ones make. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts for the Legacy.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Hardware: Hardware supplied: mounting hardware.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | KBR21-24 |
| Part Name | Sway Bar Mount |
| Vehicle | 1998 Subaru Legacy GT Limited |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bar Diameter | 24 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 24 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



