Product Details
This Whiteline 24mm Rear Sway Bar Mount Kit fits the 1995-1999 Subaru Legacy Brighton, Outback (BD/BG/BE/BH). The kit contains 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. Part number KBR21-24. It goes on the rear of the vehicle.
Sway bar mount bushings work as the bearings of the roll-control system. They need to hold the bar firmly without binding, and they have to cope with constant twisting. A new set restores that balance and quiets the knocks that worn ones make. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Hardware: Supplied with mounting hardware.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Whiteline packs an install guide with it.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | KBR21-24 |
| Part Name | Sway Bar Mount |
| Vehicle | 1995-1999 Subaru Legacy Brighton, Outback |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bar Diameter | 24 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 24 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



