Product Details
This Whiteline 22mm Rear Sway Bar Mount Kit fits the 1998 Subaru Legacy GT Limited (BD/BG/BE/BH). This part is for the rear of the vehicle. In the box: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. The part number is KBR21-22.
A bar that moves in its mounts is a bar that is not working. Replacing soft or worn mount bushings keeps it centered and lets it start resisting body roll from the first degree of lean. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Hardware: The kit includes mounting hardware.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | KBR21-22 |
| Part Name | Sway Bar Mount |
| Vehicle | 1998 Subaru Legacy GT Limited |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bar Diameter | 22 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 22 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



