Product Details
This Whiteline 22mm Rear Sway Bar Mount Kit fits the 1993-2001 Subaru Impreza WRX L (GC/GF). Part number KBR21-22. It goes on the rear of the vehicle. Included: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. Other Whiteline parts we list for the Impreza WRX L: Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Install guide: Step-by-step installation instructions come with it.
- Hardware: Hardware supplied: mounting hardware.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Finish: Powder coat finish guards the metal against chips and corrosion.
Specifications
| Part Number | KBR21-22 |
| Part Name | Sway Bar Mount |
| Vehicle | 1993-2001 Subaru Impreza WRX L |
| Drivetrain | AWD |
| Chassis Code | GC/GF |
| Bar Diameter | 22 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 22 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |




