Product Details
This Whiteline 20mm Rear Sway Bar Mount Kit fits the 2006 Saab 9-2X 2.5i (GD/GG). This part is for the rear of the vehicle. Part number KBR21-20. In the box: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the 9-2X, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Hardware: The kit includes mounting hardware.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | KBR21-20 |
| Part Name | Sway Bar Mount |
| Vehicle | 2006 Saab 9-2X 2.5i |
| Chassis Code | GD/GG |
| Bar Diameter | 20 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 20 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



