Product Details
This Whiteline 20mm Rear Sway Bar Mount Kit fits the 2005 Saab 9-2X Linear (GD/GG). This part is for the rear of the vehicle. Part number KBR21-20. Included: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers.
A bar that moves in its mounts is a bar that is not working. Replacing soft or worn mount bushings keeps it centered and lets it start resisting body roll from the first degree of lean. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. To go with it on the 9-2X, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Hardware: Hardware supplied: mounting hardware.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | KBR21-20 |
| Part Name | Sway Bar Mount |
| Vehicle | 2005 Saab 9-2X Linear |
| Chassis Code | GD/GG |
| Bar Diameter | 20 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 20 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |




