Product Details
This Whiteline 20mm Rear Sway Bar Mount Kit fits the 1998 Subaru Legacy GT Limited (BD/BG/BE/BH). Whiteline part number: KBR21-20. Included: 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers. It goes on the rear of the vehicle.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Install guide: Step-by-step installation instructions come with it.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Hardware: The kit includes mounting hardware.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | KBR21-20 |
| Part Name | Sway Bar Mount |
| Vehicle | 1998 Subaru Legacy GT Limited |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bar Diameter | 20 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 20 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



