Product Details
This Whiteline 20mm Rear Sway Bar Mount Kit fits the 1995-1999 Subaru Legacy Brighton, Outback (BD/BG/BE/BH). Order it as part number KBR21-20. It goes on the rear of the vehicle. You receive 2 bushings, 2 mounts, 2 saddles, 4 bolts, and 12 washers.
A bar that moves in its mounts is a bar that is not working. Replacing soft or worn mount bushings keeps it centered and lets it start resisting body roll from the first degree of lean. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts for the Legacy.
Features
- Hardware: Also in the box: mounting hardware.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | KBR21-20 |
| Part Name | Sway Bar Mount |
| Vehicle | 1995-1999 Subaru Legacy Brighton, Outback |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bar Diameter | 20 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 20 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 12 Washers |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



