Product Details
This Whiteline Rear Sway Bar Link fits the 2000-2009 Honda S2000 (AP1/AP2). Position: rear. Included: 2 links. Part number W23180.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in.
Installation is rated easy, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the S2000, see Adjustable Front Sway Bar Link, Front Upper Control Arm Bushing Kit, and Tie Rod Boot Kit.
Features
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Install guide: Instructions for fitting are packed in the box.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
Specifications
| Part Number | W23180 |
| Part Name | Sway Bar Link |
| Vehicle | 2000-2009 Honda S2000 (AP1/AP2) |
| Chassis Code | AP1/AP2 |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 80-320 mm |
| Material | Steel |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Universal cut to length link - must cut to 76mm |




