Product Details
This Whiteline Rear Sway Bar Link fits the 1997 Isuzu Trooper Ltd (UBS). Order it as part number W23180. It goes on the rear of the vehicle. The kit contains 2 links.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated easy, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Trooper: Front Sway Bar Link and Front Upper Shock Absorber Bushing Kit.
Features
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Material: The part is made of steel.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
Specifications
| Part Number | W23180 |
| Part Name | Sway Bar Link |
| Vehicle | 1997 Isuzu Trooper Ltd |
| Drivetrain | 4WD |
| Chassis Code | UBS |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 80-320 mm |
| Material | Steel |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Universal cut to length link - must cut to 76mm |




