Product Details
Here is the Whiteline Rear Sway Bar Link Kit - 12mm Ball Stud for the 2003-2007 Volvo XC70 (P2). Position: rear. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Order it as part number KLC180-135. The kit contains 2 links.
A sway bar link is the short rod that ties each end of the front and rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the XC70, see 14mm Adjustable Front Camber Bolts.
Features
- Material: Built from aluminum alloy.
- Install guide: An install guide comes in the box.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Hardware: Supplied with locking nuts and washers.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | KLC180-135 |
| Part Name | Sway Bar Link Kit |
| Vehicle | 2003-2007 Volvo XC70 |
| Chassis Code | P2 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 135-160 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 130-155mm. Bolt Diameter 12mm. |