Product Details
Whiteline Rear Sway Bar Link Kit - 12mm Ball Stud is made for the 2001-2009 Volvo S60. Whiteline part number: KLC180-135. In the box: 2 links. It is listed for the P2 chassis. It goes on the rear of the vehicle. Whiteline's note for this fit: Adjustable Extra Heavy Duty.
A sway bar link is the short rod that ties each end of the front and rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the Volvo S60, see 14mm Adjustable Front Camber Bolts and Front Bump Stop Bushing Kit.
Features
- Hardware: Also in the box: locking nuts and washers.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: Written install instructions are included with the part.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Built from aluminum alloy.
Specifications
| Part Number | KLC180-135 |
| Part Name | Sway Bar Link Kit |
| Vehicle | 2001-2009 Volvo S60 |
| Chassis Code | P2 |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 135-160 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 130-155mm. Bolt Diameter 12mm. |