Product Details
The Whiteline Rear Sway Bar Link Kit - 12mm Ball Stud fits the 2000-2007 Volvo V70 (P2). It goes on the rear of the vehicle. In the box: 2 links. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Order it as part number KLC180-135.
A sway bar link is the short rod that ties each end of the front and rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Volvo V70, see 14mm Adjustable Front Camber Bolts and Front Sway Bar Link Assembly.
Features
- Install guide: Step-by-step installation instructions come with it.
- Hardware: Also in the box: locking nuts and washers.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Built from aluminum alloy.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | KLC180-135 |
| Part Name | Sway Bar Link Kit |
| Vehicle | 2000-2007 Volvo V70 |
| Chassis Code | P2 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 135-160 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 130-155mm. Bolt Diameter 12mm. |