Product Details
This Whiteline Rear Sway Bar Link Kit - 10mm Ball Stud fits the 2017-2020 BMW 440i. In the box: 2 links. The part number is KLC140-135. Whiteline's note for this fit: Adjustable extra heavy duty. Position: rear.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the 440i, see Front Lower Control Arm and Tension Strut Arm Kit.
Features
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Install guide: Whiteline packs an install guide with it.
- Material: Built from aluminum alloy.
- Hardware: Supplied with locking nuts and washers.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
Specifications
| Part Number | KLC140-135 |
| Part Name | Sway Bar Links |
| Vehicle | 2017-2020 BMW 440i |
| Chassis Code | F32/F33 |
| Drivetrain | RWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 135-160 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 130-155mm. Bolt Diameter 10mm |
Fitment for 440i sway bar links
Fits the 2017-2020 BMW 440i. Each model year is listed below.