Product Details
Fitted to the 1996-1999 Acura SLX (UBS25): the Whiteline Rear Sway Bar Link. In the box: 2 links. Part number KLC102. Application note: Adjustable Extra Heavy Duty. This part is for the rear of the vehicle.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Acura SLX, see Front Upper Control Arm Bushing Kit, Front Upper Shock Absorber Bushing Kit, and Rear Sway Bar Link (80-320mm Length).
Features
- Construction: High-strength alloy gives the strength needed without much weight.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
Specifications
| Part Number | KLC102 |
| Part Name | Sway Bar Link |
| Vehicle | 1996-1999 Acura SLX |
| Chassis Code | UBS25 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 150-175 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 150-175mm. Bolt Diameter 10mm. |