Product Details
The Whiteline Rear Sway Bar Link Bushing Kit fits the 1993 Land Rover Defender 110. Position: rear. Part number W31088. Chassis code: LD. Whiteline's note for this fit: 2 piece bushing design. You receive 4 bushings.
A sway bar link has a bushing at each end where it connects to the bar and the suspension, and those bushings let the link pivot. When they are soft or worn, the bar takes up slack before it begins resisting body roll, which feels like a delay in turn-in and shows up as clunking. Replacing them restores a firm connection. The polyurethane used here deflects much less than the original rubber under the same load.
Expect an easy job of about 1 hour. No alignment is needed afterward.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Easy to fit: Installation does not call for special skills or tools.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | W31088 |
| Part Name | Sway Bar Link Bushings |
| Vehicle | 1993 Land Rover Defender 110 |
| Chassis Code | LD |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 4 Bushings |
| Material | Polyurethane |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | 2 piece bushing design |