Product Details
Fitted to the 2011-2016 Jeep Compass Latitude: the Whiteline Adjustable Rear Sway Bar Link. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Position: rear. Part number KLC144. The listing names the Latitude trim. Chassis code: MK. The kit contains 2 links.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Working on the same car? We also list 14mm Adjustable Front Camber Bolts, Adjustable Front Sway Bar Link, and Front Control Arm Lower Inner Rear Bushing for the Compass.
Features
- Construction: High-strength alloy gives the strength needed without much weight.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Hardware: The kit includes locking nuts and washers.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2016 Jeep Compass Latitude |
| Chassis Code | MK |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |