Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2007 Subaru Outback 2.5i Basic . Whiteline's note for this fit: Adjustable Extra Heavy Duty. Position: rear. Part number KLC144. You receive 2 links.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. To go with it on the Outback, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Install guide: Instructions for fitting are packed in the box.
- Pre-greased: Joints arrive pre-greased and ready to install.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2007 Subaru Outback 2.5i Basic |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |



