Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2005 Subaru Outback i, VDC Limited (BP). Whiteline's note for this fit: Adjustable Extra Heavy Duty. Order it as part number KLC144. Placement: rear. Included: 2 links.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Outback, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Hardware: The kit includes locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2005 Subaru Outback i, VDC Limited |
| Chassis Code | BP |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |



