Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2005 Subaru Legacy i, Limited (BL/BP). Application note: Adjustable Extra Heavy Duty. In the box: 2 links. It goes on the rear of the vehicle. Whiteline part number: KLC144.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. To go with it on the Legacy, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Install guide: Instructions for fitting are packed in the box.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Construction: Made from strong, light alloy.
- Hardware: Hardware supplied: locking nuts and washers.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2005 Subaru Legacy i, Limited |
| Chassis Code | BL/BP |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |




