Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2005-2006 Subaru Outback R, XT (BP). Position: rear. Order it as part number KLC144. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The kit contains 2 links.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Outback, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Hardware: Hardware supplied: locking nuts and washers.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Install guide: An install guide comes in the box.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2006 Subaru Outback R, XT |
| Chassis Code | BP |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |




