Product Details
Whiteline built the Adjustable Rear Sway Bar Link for the 2007-2011 Toyota Camry Hybrid (XV40). Placement: rear. The listing names the Hybrid trim. Whiteline part number: KLC163. Included: 2 links.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the Camry, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Adjustable Front Sway Bar Link.
Features
- Construction: The body is made from high-grade alloy for strength without added weight.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Hardware: Supplied with locking nuts and washers.
- Install guide: Whiteline packs an install guide with it.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2011 Toyota Camry Hybrid |
| Chassis Code | XV40 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |