Product Details
Owners of the 2007-2009 Subaru Legacy (BM/BR) can fit the Whiteline Adjustable Rear Sway Bar Drop Links. Position: rear. You receive 2 links. Order it as part number KLC139. Application note: Adjustable Extra Heavy Duty.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. A wheel alignment is not required. To go with it on the Legacy, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Pre-greased: Joints arrive pre-greased and ready to install.
- Material: Built from steel.
- Responsiveness: Improves response in lane changes and cornering.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- DIY friendly: Goes on as a direct-fit bolt-on install.
- Warranty: Comes with a Whiteline warranty, listed at 3 years and 60,000 miles.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2009 Subaru Legacy 2.5i Limited, 2.5i Special Edition |
| Chassis Code | BM/BR |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |