Product Details
Fitted to the 2003 Subaru Legacy L SE (BE/BH/BL/BP): the Whiteline Adjustable Rear Sway Bar Drop Links. Application note: Adjustable Extra Heavy Duty. Whiteline part number: KLC139. Position: rear. The listing names the L SE trim. The kit contains 2 links.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the Legacy, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Hardware: Also in the box: locking nuts and washers.
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
- Responsiveness: Improves response in lane changes and cornering.
- DIY friendly: A straightforward bolt-on job for a home mechanic.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2003 Subaru Legacy L SE |
| Chassis Code | BE/BH/BL/BP |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |