Product Details
Made to fit the 2001 Mitsubishi Mirage ES, the Adjustable Rear Sway Bar Drop Links from Whiteline. Placement: rear. The kit contains 2 links. Trim named on the listing: ES. Chassis code: CA0. Order it as part number KLC139. Application note: Adjustable Extra Heavy Duty.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Working on the same car? We also list 12mm Adjustable Front Camber Bolts, Front Sway Bar Washer Kit, and Front Strut Tower Brace Quick Release Kit for the Mirage.
Features
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Material: The part is made of steel.
- DIY friendly: Goes on as a direct-fit bolt-on install.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
- Responsiveness: Improves response in lane changes and cornering.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2001 Mitsubishi Mirage ES |
| Chassis Code | CA0 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |