Product Details
The Whiteline Adjustable Rear Sway Bar Drop Links fit the 2001-2015 Honda Civic DX, EX, GX, LX (FA/FN). The kit contains 2 links. It goes on the rear of the vehicle. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The listing names the DX, EX, GX, and LX trims. Order it as part number KLC139.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Civic: 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and Rear Control Arm Lower Rear Inner Bushing.
Features
- DIY friendly: A straightforward bolt-on job for a home mechanic.
- Warranty: Comes with a Whiteline warranty, listed at 3 years and 60,000 miles.
- Responsiveness: Improves response in lane changes and cornering.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Material: Made from steel.
- Hardware: Supplied with locking nuts and washers.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2001-2015 Honda Civic DX, EX, GX, LX |
| Chassis Code | FA/FN |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |



