Product Details
Whiteline Adjustable Rear Sway Bar Drop Links are made for the 1998-2006 Subaru Legacy GT. The listing names the GT trim. Placement: rear. In the box: 2 links. It is listed for the BE/BH/BL/BP chassis. Application note: Adjustable Extra Heavy Duty. Part number KLC139.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Working on the same car? We also list 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing for the Legacy.
Features
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Hardware: Also in the box: locking nuts and washers.
- DIY friendly: A straightforward bolt-on job for a home mechanic.
- Material: The part is made of steel.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 1998-2006 Subaru Legacy GT |
| Chassis Code | BE/BH/BL/BP |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |