Product Details
The Whiteline Adjustable Rear Sway Bar Drop Links fit the 1998-2000 Subaru Legacy Brighton (BE/BH). Part number KLC139. Included: 2 links. Whiteline's note for this fit: Adjustable Extra Heavy Duty. This part is for the rear of the vehicle. Trim named on the listing: Brighton.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. To go with it on the Legacy, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Warranty: Whiteline's listed warranty is 3 years and 60,000 miles.
- Material: Built from steel.
- DIY friendly: A straightforward bolt-on job for a home mechanic.
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 1998-2000 Subaru Legacy Brighton |
| Chassis Code | BE/BH |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |



