Product Details
Whiteline built the Adjustable Rear Sway Bar Drop Links for the 1998-1999 Subaru Legacy Outback (BE/BH). Included: 2 links. Position: rear. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The part number is KLC139.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Legacy Outback: 14mm Adjustable Front Camber Bolts, Front Steering Rack And Pinion Mount Bushing, and Front Strut Tower Brace.
Features
- DIY friendly: Goes on as a direct-fit bolt-on install.
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
- Responsiveness: Improves response in lane changes and cornering.
- Hardware: The kit includes locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 1998-1999 Subaru Legacy Outback |
| Drivetrain | AWD |
| Chassis Code | BE/BH |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |