Product Details
This page covers the Whiteline Adjustable Rear Sway Bar Drop Links for the 1996-2002 Mitsubishi Mirage LS. Trim named on the listing: LS. This part is for the rear of the vehicle. It is listed for the CA0 chassis. Included: 2 links. Order it as part number KLC139. Application note: Adjustable Extra Heavy Duty.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. To go with it on the Mirage, see 12mm Adjustable Front Camber Bolts, Front Sway Bar Washer Kit, and Front Strut Tower Brace Quick Release Kit.
Features
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Responsiveness: Improves response in lane changes and cornering.
- Warranty: Comes with a Whiteline warranty, listed at 3 years and 60,000 miles.
- Hardware: Supplied with locking nuts and washers.
- Material: Made from steel.
- DIY friendly: A straightforward bolt-on job for a home mechanic.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 1996-2002 Mitsubishi Mirage LS |
| Chassis Code | CA0 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |