Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2009-2011 Volkswagen CC Luxury, Sport, VR6 4Motion (3C). The kit contains 2 links. It goes on the rear of the vehicle. The part number is KLC141. Application note: Suits models with control arm link mount: adjustable extra heavy duty.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect an easy job of about 1 hour. No alignment is needed afterward. To go with it on the Volkswagen CC, see Adjustable Front Sway Bar Link, Front and Rear Sway Bar Kit, and Front Control Arm Lower Inner Rear Bushing.
Features
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Hardware: Hardware supplied: locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Material: The part is made of steel.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2011 Volkswagen CC Luxury, Sport, VR6 4Motion |
| Chassis Code | 3C |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |



