Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2007 Volkswagen Eos 2.0T, 3.2, Base (1F). Placement: rear. In the box: 2 links. The part number is KLC141. Application note: Suits models with control arm link mount: adjustable extra heavy duty.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect an easy job of about 1 hour. A wheel alignment is not required. To go with it on the Volkswagen Eos, see Adjustable Rear Upper Control Arm Set, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Material: Built from steel.
- Hardware: The kit includes locking nuts and washers.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 2007 Volkswagen Eos 2.0T, 3.2, Base |
| Chassis Code | 1F |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |



