Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2007-2013 Mazda Mazdaspeed 3 Base (BL). Application note: Adjustable Extra Heavy Duty. Part number KLC185. Placement: rear. Included: 2 links, 6 washers, and 2 nuts.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. To go with it on the Mazdaspeed 3, see Front Strut Tower Brace, Front Strut Tower Brace Quick Release Kit, and Front Engine Mount Rear Bushing.
Features
- Compliance voids: Molded voids give the bushing room to flex where it needs to.
- Hardware: Supplied with locking nuts and washers.
- Install guide: An install guide comes in the box.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
Specifications
| Part Number | KLC185 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2013 Mazda Mazdaspeed 3 Base |
| Drivetrain | FWD |
| Chassis Code | BL |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 / 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 6 Washers, 2 Nuts |
| Length | 65-75 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-75mm. Bolt Diameter 12mm. |



