Product Details
This Whiteline Rear Sway Bar Link fits the 1999-2003 Toyota Solara SE, SLE (XV20). In the box: 2 links and 4 washers. This part is for the rear of the vehicle. The part number is KLC187. Whiteline's note for this fit: Adjustable Extra Heavy Duty.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required. We also list 17mm Adjustable Front Camber Bolts for the Solara.
Features
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Install guide: Step-by-step installation instructions come with it.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Hardware: Also in the box: locking nuts and washers.
- Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
| Part Number | KLC187 |
| Part Name | Sway Bar Link |
| Vehicle | 1999-2003 Toyota Solara SE, SLE |
| Chassis Code | XV20 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Washers |
| Length | 190-215 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 190-215mm. Bolt Diameter 10mm. |


