Product Details
This Whiteline Rear Sway Bar Link fits the 1997-2001 Toyota Camry CE (XV20). You receive 2 links and 4 washers. Placement: rear. Application note: Adjustable Extra Heavy Duty. Order it as part number KLC187.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. To go with it on the Camry, see Adjustable Front Sway Bar Link, 17mm Adjustable Front Camber Bolts, and Heavy Duty 20mm Rear Sway Bar.
Features
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Construction: Made from strong, light alloy.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Hardware: Hardware supplied: locking nuts and washers.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
Specifications
| Part Number | KLC187 |
| Part Name | Sway Bar Link |
| Vehicle | 1997-2001 Toyota Camry CE |
| Chassis Code | XV20 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Washers |
| Length | 190-215 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 190-215mm. Bolt Diameter 10mm. |

