Product Details
Made to fit the 1987-1992 Toyota Camry DLX, the Adjustable Rear Sway Bar Link from Whiteline. Chassis code: V20. Trim named on the listing: DLX. Part number KLC141. Placement: rear. In the box: 2 links. Whiteline's note for this fit: Suits models with control arm link mount: adjustable extra heavy duty.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect an easy job of about 1 hour. It does not require a wheel alignment. To go with it on the Camry, see 17mm Adjustable Front Camber Bolts, Rear Lower Trailing Arm Bushing, and 15mm Rear Sway Bar Bushing Kit.
Features
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Material: Made from steel.
- Install guide: Whiteline packs an install guide with it.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Hardware: Also in the box: locking nuts and washers.
- Pre-greased: Joints arrive pre-greased and ready to install.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 1987-1992 Toyota Camry DLX |
| Chassis Code | V20 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |