Product Details
This Whiteline Rear Sway Bar Link fits the 1986-1999 Toyota Celica GT (T160/T180). Included: 2 links. Position: rear. Whiteline's note for this fit: Excludes models with FE3 Suspension: vehicle specific link. Order it as part number W23169.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated easy, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Celica, see 12mm Adjustable Front Camber Bolts, Front Strut Tower Brace, and Front Control Arm Lower Inner Rear Bushing.
Features
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Material: Built from steel.
Specifications
| Part Number | W23169 |
| Part Name | Sway Bar Link |
| Vehicle | 1986-1999 Toyota Celica GT |
| Chassis Code | T160/T180 |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 105 mm |
| Material | Steel |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Excludes models with FE3 Suspension - vehicle specific link |


