Product Details
This Whiteline Rear Spring Eye Rear Bushing fits the 1987-1989 Dodge Raider Base (NA). In the box: 4 bushings. Part number W71056. Position: rear.
A tired leaf spring bushing lets the axle wander under braking, acceleration, and load. Fresh bushings hold the spring ends firmly while still letting them pivot. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as easy and lists about 1 hour. Get the car aligned once it is back on the ground. To go with it on the Raider, see Front Sway Bar Washer Kit, Front Sway Bar Link Bushing Kit, and Front Upper Shock Absorber Bushing Kit.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
Specifications
| Part Number | W71056 |
| Part Name | Spring Eye Bushing |
| Vehicle | 1987-1989 Dodge Raider Base |
| Chassis Code | NA |
| Bracket Included | No |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 4 |
| Color | Black |
| Durometer | 94 |
| Grade Type | Regular |
| Inside Diameter | 16 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 4 Bushings |
| Length | 39 mm |
| Material | Polyurethane |
| Outside Diameter | 28 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |


