Product Details
This Whiteline Rear Differential Bushings - Mount Support Outrigger fits the 2001-2003 Subaru Outback VDC (BE/BH). Order it as part number KDT905. Included: 4 bushings, 2 tubes, an install guide, and grease. It goes on the rear of the vehicle.
Holding the differential still is about predictability. Rubber that is too soft lets it twist and move as load comes on and off, so the car squats and lurches a little more than it needs to. A firmer mount keeps it where it should be. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 4 hours. Plan on a wheel alignment afterward. To go with it on the Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Steering Rack And Pinion Mount Bushing.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: Step-by-step installation instructions come with it.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Grease: Moly grease is supplied to prolong the life of the parts.
Specifications
| Part Number | KDT905 |
| Part Name | Differential Bushings |
| Vehicle | 2001-2003 Subaru Outback VDC |
| Drivetrain | AWD |
| Chassis Code | BE/BH |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 85 |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Bushings, 2 Tubes, Install Guide, Grease |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |




