Product Details

This Whiteline Rear Differential Mount Support Outrigger Bushing fits the 1996-1999 Subaru Legacy GT (BE/BH). Whiteline's note for this fit: Some vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040. In the box: 2 shell bushings, 2 tubes, an install guide, and grease. Whiteline part number: W91379. It goes on the rear of the vehicle.

Holding the differential still is about predictability. Rubber that is too soft lets it twist and move as load comes on and off, so the car squats and lurches a little more than it needs to. A firmer mount keeps it where it should be. The polyurethane used here deflects much less than the original rubber under the same load.

Installation is rated difficult, with about 4 hours of work listed. An alignment is required after installation. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.

Features

  • Bonded design: The bushing is bonded for strength where loads are highest.
  • Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
  • Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
  • Finish: Powder coating covers the metal for protection against chips and rust.
  • Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
  • Grease: Moly grease is supplied to prolong the life of the parts.
Specifications
Part Number W91379
Part Name Differential Mount Bushing
Vehicle 1996-1999 Subaru Legacy GT
Drivetrain FWD/AWD
Chassis Code BE/BH
Bushing Color Black
Bushing Material Polyurethane
Color Black
Durometer 72
Installation Difficulty Difficult
Installation Time (hrs) 4
Kit Contents 2 Shell Bushings, 2 Tubes, Install Guide, Grease
Material Polyurethane
Mounting Hardware Included No
Universal or Specific Fit Specific Fit
Vehicle Placement Rear
Wheel Alignment Required Yes
Notes Some vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1996SubaruLegacyFWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040
1996SubaruLegacyAWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040
1997SubaruLegacyFWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040
1997SubaruLegacyAWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040
1998SubaruLegacyFWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040
1998SubaruLegacyAWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040
1999SubaruLegacyFWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040
1999SubaruLegacyAWDSome vehicles may require an additional differential support plate for installation. Subaru Part # 41321FA040

Customer Reviews

Questions & Answers