Product Details
These Whiteline Rear Differential Bushings - Mount In Cradle Inserts fit the 2006-2013 Subaru Legacy 2.5i (BL/BP/BM/BR). The kit contains 2 insert bushings and 2 washers. The part number is KDT927. Application note: Positive diff retention: inserts only. This part is for the rear of the vehicle. Chassis code: BL/BP/BM/BR.
Holding the differential still is about predictability. Rubber that is too soft lets it twist and move as load comes on and off, so the car squats and lurches a little more than it needs to. A firmer mount keeps it where it should be. The polyurethane used here deflects much less than the original rubber under the same load. This version is an insert design, made to fit into the voids of the original bushing instead of replacing the whole mount.
Expect a moderate job of about 1.5 hours. A wheel alignment is not required. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Insert design: The inserts go into the original bushing rather than replacing it.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Bonded design: Bonding adds durability in high-load use.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | KDT927 |
| Part Name | Differential Bushings |
| Vehicle | 2006-2013 Subaru Legacy 2.5i |
| Chassis Code | BL/BP/BM/BR |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 85 |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 2 Insert Bushings, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Positive diff retention - inserts only |




