Product Details
This Whiteline Rear Control Arm Upper Rear Bushing fits the 2017-2020 BMW M240i xDrive 2 Series. Whiteline's note for this fit: Fits OEM Arm 33-32-6-792-543 (Left) and 33-32-6-792-544 (Right). You receive 4 shell bushings and 4 tubes. It is listed for the F22/F23 chassis. Part number W63593. Placement: rear. The listing names the xDrive 2 Series trim.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 2 hours of work listed. Get the car aligned once it is back on the ground. Working on the same car? We also list Rear Subframe Mount Bushing, Rear Differential Mount Bushing, and Front Lower Control Arm and Tension Strut Arm Kit for the M240i.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: The part is made of polyurethane.
- Install guide: Step-by-step installation instructions come with it.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | W63593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2017-2020 BMW M240i xDrive 2 Series |
| Chassis Code | F22/F23 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Fits OEM Arm 33-32-6-792-543 (Left) and 33-32-6-792-544 (Right) |

