Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2005 Subaru Outback i, VDC Limited (BP). Part number KCA399. In the box: 4 bushings and 2 tubes. This part is for the rear of the vehicle. Whiteline's note for this fit: On-Car Adjustable Allows +/- 1.25 degrees.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. To go with it on the Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: The part is made of polyurethane.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Step-by-step installation instructions come with it.
- Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
| Part Number | KCA399 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005 Subaru Outback i, VDC Limited |
| Chassis Code | BP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-Car Adjustable Allows +/- 1.25 Degrees; |



