Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2003 Subaru Legacy L SE (BE/BH/BL/BP). Whiteline's note for this fit: On-Car Adjustable Allows +/- 1.25 degrees. Whiteline part number: KCA399. This part is for the rear of the vehicle. In the box: 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Material: The part is made of polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: An install guide comes in the box.
- Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
- Grease: Moly grease is supplied to prolong the life of the parts.
Specifications
| Part Number | KCA399 |
| Part Name | Control Arm Bushing |
| Vehicle | 2003 Subaru Legacy L SE |
| Chassis Code | BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-Car Adjustable Allows +/- 1.25 Degrees; |




