Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2000-2002 Subaru Legacy GT Limited (BE/BH). Part number KCA399. This part is for the rear of the vehicle. In the box: 4 bushings and 2 tubes. Application note: On-Car Adjustable Allows +/- 1.25 degrees.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Install guide: Written install instructions are included with the part.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Material: Built from polyurethane.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | KCA399 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2002 Subaru Legacy GT Limited |
| Chassis Code | BE/BH |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-Car Adjustable Allows +/- 1.25 Degrees; |



